- Display 30 Products per page
Products
- MAF/RF Pickups
- Honeywell STD700
- Max Fire Series 100MAXFire Series 100 Gas Igniters provide the most reliable source of energy from the main flame ignition, flame stabilization, and boiler warm-up.
- Rousemount-6888-SITU FLUE GAS OXYGEN TRANSMITTERBy maintaining the ideal level of oxygen, the flue gases coming from these processes, optimal efficiency is gained, and the lowest level of NOX, CO, and CO2 are produced.
- Hazardous Area OxymitterThe Oxymitter In Situ Oxygen Transmitter was the world’s first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
- Rosemount- Bypass PDS-106-302-A01Provides the same accurate, reliable measurement of excess oxygen in combustion flue gas as standard in situ, industrial oxygen analyzer
- Power Pack HESI-UTCThe High Energy Spark Igniter, HESI Series 90 is a Class 3 Igniter used for direct spark ignition of oil or gas igniters or small burners. The 12 joules of energy delivered to the spark tip (3 sparks per second) easily ignites the fuel.
- Rosemount- Xi Box BulletinThe zirconium oxide sensing technology for measuring the excess oxygen in combustion flue gases has gained prominence over the past several decades. This versatile electronics is specifically designed to run most O2 probes manufactured. The large backlit LCD display makes it easy to set up and operate. Fully automatic calibrations may be executed from these electronics with the addition of a small solenoid box for switching calibration gases.
- Fireye-45RM4-1000
- Honeywell EC7823A;RM7823AThe Honeywell EC/RM7823A Relay Module is a microprocessor based flame detector relay that can be fitted with any 7800 SERIES Flame Amplifier to provide relay action from one dpdt relay when flame is or is not present. The EC/RM7823A system consists of a relay module, wiring subbase and flame amplifier. Options include keyboard display module (KDM), personal computer interface, Data ControlBus Module., remote display mounting and Combustion System Manager. Software.
- Positive Displacement Flowmeters
- Variable Area Flowmeter
- Forney- High Energy Spark IgniterForney High Energy Spark Igniter provides a highly reliable, non-fouling source of ignition for oil or gas igniters or small burners
- Hagan Power Positioner 102-201_200706Rosemount Analytical power positioners are manufactured in cylinder sizes from 2-1/2 to 8 inches in diameter with strokes of 5 to 14 inches. They come in thrust and torque models for wall, swivel or floor mounting and with accessories such as limit switches, position transmitters, heated enclosures, air failure lock and characterized cams that provide an output motion that is a function of the input signal.
- Fireye-25SU3-2100
- Rosemount Hi-Temp 5081Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating temperature using a heater that is powered via the analyzer’s electronics.
- Testo 350 Portable Emission Analyzer-IndustrialThe ultra-rugged construction, coupled with a simple intuitive operation and innovative emeasurement technology, sets the new standard in emission testing and combustion analysis.
- Testo 300 Combustion AnalyzerTesto 300 - flue gas analyzer
- Testo 320 and 310 Combustion Analyzer- Residential & CommercialTesto 310 & 320 make combustion analysis easier to perform, easier to control, and easier to understand. Testo 310 residential combustion analyzer represents a new class of instruments for Testo & provides exceptional value and expanded capabilities in combustion testing. Testo 320 is designed for the job site & for the contractor that expects more. Use it for basic testing & tuning of all types of boilers, heater or furnaces. Use it to set up and commission more complex multi-stage, or modulating heating systems.
- Testo 340 4-Gas Combustion Analyzer-IndustrialThe ultimate instrument in portable combustion and engine tuning. Optimizing combustion, increasing efficiency and minimizing fuel use is necessary to compete in today's market. The Testo 340 provides the information to understand your process, enabling you to make informed combustion decisions. It is the ideal tool to confirm proper set-up or identify emission problems. Ideal for - Boilers, Burners, Furnaces, and Engines!
- Turbine Flowmeters
- Fireye-45UV5-1000
- Testo 330 Combustion Analyzer- Commercial/Light IndustrialThe ultimate instrument in portable combustion and engine tuning. The Testo 330-1 LX combustion analyzer has a full-color graphic display, which allows you to visualize flue gas measurement data clearly. With field replaceable, pre-calibrated sensors, the Testo 330-1 LX ensures a long product life, allowing for many flue gas testing options.
- Honeywell C645A-EThe C645 pressure switches are safety devices used in positive-pressure or differential-pressure systems to sense gas or air pressure changes.
BRANDS
- Forney (5)
- Honeywell (5)
- Maxon Valves (1)
- Featured (6)
- FlowMetrics (8)
- Copaltite (1)
- Fireye (11)
- Micronics (2)
- Altech (3)
- Honeywell Process Solutions (4)
- Rosemount (8)
- Testo (6)
MID-SOUTH SALES CO., INC.
OFFICE HOURS
Mon – Fri: 8am – 4:30 pm
Saturday: Closed
Sunday: Closed